KIT_A2G_TC377TX_3V3_TRB

Overview

Order Nr.: KITA2GTC377TX3V3TRBTOBO1
Price: 649,- EUR

This 3V3 AURIX™  TC377TX evaluation board, has a 2xGigabit Ethernet interface for added connectivity. The device is mounted mounted directly on the board and enables customers to quickly start developing, evaluating and testing heir software.

A downloadable User Manual helps with the installation, use and configuration of the board and includes the schematics and the layout. ( See also Documents section )

 

Summary of Features

  • Infineon’s AURIX™ TC377TX Controller in LFBGA-292_ADAS Package
  • FlexRay™ 1) Transceivers
  • High Speed CAN Transceivers (CAN-FD capable)
  • USB to UART bridge
  • Ethernet Gigabit PHYs
  • Serial Eeprom
  • LIN Transceiver
  • SD card slot (mini SD)
  • Crystal 20MHz (default) or External Clock
  • USB miniWiggler JDS for easy debugging
  • 8 Low Power Status LEDs
  • 8-DIP switches for configuration
  • access to all pins of controller
  • 100mm x 160mm (EURO-Board)

Connectors :

The TC377TX TriBoard offers a wide variety of connectors:

  • Standard power connector
  • Micro USB connector for ASC Interface (ASC0) and miniWiggler
  • 2 x RJ45 connector for Ethernet
  • 16-pin header for JTAG interface (OCDS)
  • 3 x 10-pin header for DAP, DAPE and DAP_SCR (DAPE only usable on Emulation Device)
  • 10pin (2x5) Header for LIN Transceiver (LIN)
  • 2 x 10pin (2x5) Header for CAN High Speed Transceiver (CAN0 and CAN1)
  • 2 x 10pin (2x5) Header for FlexRay™ (ERAY-A and ERAY-B)
  • mini SD card slot
  • four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals
  • optional ETK connector
  • optional 6pin (IEEE1394) Socket for HSCT
  • optional Aurora connector (only with Emulation Device)

Components

  • Infineon’s Multi Voltage System Supply TLF3068xQVS01
  • Three LEDs to validate power supply (5Volt / 3,3 Volt / 1,25 Volt)
  • LED indicating safe state signal from TLF3068x 
  • LED indicating /HDRST (ESR0) active state
  • LED indicating activ miniWiggler JDS
  • LED switched via DAS software
  • 2 x Infineon’s FlexRay™ Transceiver TLE9221SX
  • 2 x Infineon’s High Speed CAN-Transceiver TLE9251VSJ
  • Infineon’s LIN-Transceiver TLE 7259-3GE
  • USB to UART bridge FT2232HL (FTDI) 1) FlexRay™ is a trademark of FlexRay Consortium.
  • 2 x Integrated 10/100/1000M Ethernet Precision Transceiver RTL8211FI-CG 
  • 8 general purpose LEDs
  • 2 x 2K I2C Serial Eeprom with EUI-64™ 1) Node Identity (MICROCHIP)
  • Reset switch
  • Wakeup switch
  • Generic switch
  • 4-pin Dip switch
Support