KIT_A2G_TC389_5V_TRB

Overview

Order Nr.: KITA2GTC3895VTRBTOBO1, Price: 649,- EUR 

The 5V standard AURIX™ TC389 evaluation board has a TC389QP mounted directly on the board and enables customers to quickly start developing, evaluating and testing their software.

A downloadable User Manual helps with the installation, use and configuration of the board and includes the schematics and the layout. 

Summary of Features

  • Infineon’s AURIX™TC389  in LFBGA-516 Package
  • Burst Flash up to 4MBytes (not with BGA 292)
  • Asynchronous SRAM up to 2MByte (not with BGA 292)
  • Synchronous SRAM up to 4MByte (not with BGA 292)
  • FlexRay™ Transceivers
  • High Speed CAN Transceivers (CAN-FD capable)
  • USB to UART bridge
  • Ethernet Gigabit PHY
  • Serial Eeprom
  • LIN Transceiver
  • Crystal 20MHz (default) or External Clock
  • USB miniWiggler JDS for easy debugging
  • 8 Low Power Status LEDs
  • 8-DIP switches for configuration
  • Access to all pins of controller
  • 100mm x 160mm (EURO-Board)

 Connectors:

The TC389 TriBoard offers a wide variety of connectors:

  • Standard power connector
  • Micro USB connector for ASC Interface (ASC0) and miniWiggler
  • RJ45 connector for Ethernet
  • 16-pin header for JTAG interface (OCDS)
  • 2 x 10-pin header for DAP and DAPE (DAPE only usable on Emulation Device)
  • 10pin (2x5) Header for LIN Transceiver (LIN)
  • 2 x 10pin (2x5) Header for CAN High Speed Transceiver (CAN0 and CAN1)
  • 2 x 10pin (2x5) Header for FlexRay™ (ERAY-A and ERAY-B)
  • Five 80-pin connectors (male) + five 80-pin connectors (female) with all I/O signals
  • Optional ETK connector
  • Optional 6pin (IEEE1394) Socket for HSCT
  • Optional Aurora connector (only with Emulation Device)

 Components:

  • Infineon’s Multi Voltage Safety Micro Processor Supply TLF35584QV
  • Three LEDs to validate power supply (5Volt / 3,3 Volt / 1,25 Volt)
  • LED indicating safe state signal 2 from TLF35584
  • LED indicating /HDRST (ESR0) active state
  • LED indicating activ miniWiggler JDS
  • LED switched via DAS software
  • 2 x Infineon’s FlexRay™ Transceiver TLE9221SX
  • 2 x Infineon’s High Speed CAN-Transceiver TLE9251VSJ

 Features:

  • Infineon’s LIN-Transceiver TLE 7259-3GE
  • USB to UART bridge FT2232HL (FTDI)
  • Single Port Gigabit Ethernet PHY PEF7071 (LANTIQ)
  • 8 general purpose LEDs
  • 2K I 2C Serial Eeprom with EUI-48™  Node Identity (MICROCHIP)
  • Reset switch
  • Enable switch
  • Generic switch
  • 4-pin Dip switch

Benefits

  • With our software toolchain, this TriBoard offers a quick hands on and evaluation of Aurix™ TC3xx family.

 

Potential Applications

  • Automotive
  • Electromobility
  • Industrial

User Manual

Support