TRENCHSTOP™ 5 S5

Überblick

S5 Technology: Medium speed switching IGBT with full rated current diode

Developed with the customer in mind - S5 is the new IGBT family addressing applications switching between 10 kHz and 40 kHz to deliver high efficiency, faster time to market cycles, circuit design complexity reduction and PCB bill of material cost optimization.

Related information about other products in this family

Produkte
Highlights

The TRENCHSTOP™ 5 S5 family is packed with features to help the designers achieve their goals without the need to increase circuit complexity.

  • Static behavior - mild positive temperature coefficient VCE(sat), meaning paralleling is no problem and efficiency isn’t compromised during high temperature operation. At 175°C, typical VCE(sat) is a low 1.6 V.
  • Dynamic behavior – single gate resistance selection for turn-on/turn-off due to the smooth switching behavior. Clean gate signals, low dv/dt, low and very symmetrical voltage overshoot.
Key features Key benefits Application
  • Very low VCE(sat) of 1,35 V at 25°C, 20% lower than TRENCHSTOP™ 5 H5
  • IC(n) = 4x nominal current (100°C Tc)
  • Soft current fall characteristic with no tail current
  • Symmetrical, low voltage overshoot
  • Gate voltage under control (no oscillation). No risk of unwanted turn-on of device and no need for gate clamping
  • Maximum junction temperature Tvj=175°C.
  • Qualified according to JEDEC standards
  • VCE(peak) clamping circuits not required
  • Suitable for use with single turn-on/-off gate resistor
  • No need for gate clamping components
  • Gate drivers with Miller clamping not required
  • Reduction in the EMI filtering needed
  • Excellent for paralleling

 

 

 
  • Lower switching losses with Kelvin Emitter TO-247 4pin package
  • More than 20% reduction of the switching losses
  • Higher efficiency
  • Higher power output

 

650 V TRENCHSTOP™ 5 Family Selection Tree - Selection guide

This might also interest you

Videos
Share
Share
Share
Support