Memory Solutions Hub

Infineon provides Pmod-compatible memory modules which make it easy to integrate SEMPER™ devices into any hardware development platform. Eval kits plug in directly to any platform with a SPI interface Pmod connector. If your platform does not support Pmod, you can easily use wires to connect the hardware. Either way, you save significant development time and effort.

Infineon supports a wide variety of development platforms, including:

• our own PSoC™, AURIX™ and XMC microcontroller kits,
• industry-standard SoCs, such as Raspberry PI and NVIDIA Jetson Nano, and
• other proprietary platforms.

Whatever your platform of choice, Infineon Memory Solutions Hub software, memory modules, resources, and tools will simplify your design and speed time to market.

PSoC™ Prototyping Kits

PSoC™ 64 "Secure Boot" Prototyping Kits are low-cost hardware platforms that enable you to evaluate and develop your application using the PSoC™ 64 Line of Secured MCUs. The kits allow you to provision the PSoC™ 64 "Secure" MCU with unique keys and security policies so that only signed code can be executed. These kits feature a 3.0V 512Mbit Semper NOR Flash Memory that is connected to the SMIF interface that supports SPI and Quad SPI protocols.

PSoC™ 6 Wi-Fi BT Prototyping Kit (CY8CPROTO-062-4343W) is a low-cost hardware platform that enables design and debug of PSoC™ 6 MCUs. The SMIF based Quad SPI Flash interface is fully brought out on easily accessible headers. SEMPER™ Flash family memory modules can be easily connected to the SMIF pins on the headers.

AURIX^TM TC375 lite kit

This kit is equipped with a 32-bit single-chip AURIX^TM TriCore^TM based microcontroller Aurix^TM TC375. It can be used with a range of development tools including AURIX^TM Development Studio, Infineon’s free of charge Eclipse-based IDE or the Eclipse-based "FreeEntryToolchain” from Hightec/PLS/Infineon.

Mikroe SEMPER Flash Click and SEMPER Flash 2 Click can be directly connected to the mikroBUS interface without need for any additional wiring or modifications.

Third party development kits

SEMPER™ software also runs on standard 3^rd-party platforms, such as Raspberry Pi and NVIDIA Jetson Nano. SEMPER™ NOR Flash memory can be integrated quickly with the SEMPER™ Flash Family memory modules. The Digilent® Pmod HAT Adapter is recommended as it eliminates need for jumper wires.  The SMC HAL provided in SEMPER™ SDK makes it easy to integrate memory modules into any application.

Other proprietary platforms

Platforms not explicitly listed here are supported by SEMPER™ SDK. However, HALs will need to be developed to enable these platforms. We provide templates of HALs to ease the porting process.