XC2300 family (safety) - Infineon Technologies

Overview

XC2300 microcontrollers are suitable for high-end body control modules (BCM) and gateways with a flash size of up to 1.6 MB and 128 MHz performance

XC2300 family (safety) subcategories

About XC2300 microcontrollers

XC2300 family is based on the industry-leading C166SV2 high-performance microcontrollers. With an extended memory size of up to 1.6 MB of flash and up to 138 KB of RAM running at up to 128 MHz, the microcontrollers are well suited for high-end BCM and gateway applications. This high-end extension of the XC2300 family, as well as the low-end and high-performance products launching in 2010, completes the rich portfolio of scalable products. XC2300 MCUs offer state-of-the-art connectivity with up to 24 ADC channels and three CAN Nodes. They are additionally characterized by a rich peripheral set with a general purpose timer (GPT12E) unit. XC2300 family devices use the package types QFP-38, QFP-48, QFP-64, QFP-100, QFP-144, and QFP-176.

Benefits

Customer benefits

Fast time to market due to Infineon's proven in-use safety concept
Comprehensive safety documentation intelligent error-management avoids false alarms and therefore reduces the
FIT/DPPM rate
Scalable platform guarantees an optimized cost-performance ratio
Supports ASIL requirements

Cost-optimized safety computing platform

XC2300 and CIC61508

The implementation of ISO26262 and IEC61508 standard-compliant safety-critical systems requires an independent, robust safety watchdog for main microcontroller supervision.

Thus, microcontroller-based safety systems must be made up of three components: the main microcontroller, an independent watchdog with robust monitoring channels, and supporting safety software.

Infineon's safety computing platform addresses all three of these components:

XC2300 MCU family
CIC61508 is an independent
SafeTcore safety library

All three components were specified and developed for efficient implementation and a fast time to market.

Typical target applications of Infineon’s safety computing platform are IEC61508/SIL3 and ISO26262/ASIL-C and ASIL-D.

CIC61508:

Intelligent error management
Robust monitoring channel
Up to three safety enable/disable paths
Task monitoring
Wide temperature range (-40°C to 140°C)
TSSOP-38 package

SafeTcore library:

Processor monitoring and self-tests
Independent safety monitor software with tasking (V5r2p3)
Supports ISO26262/IEC61508
Small memory footprint (typically 92 KB ROM)

Technical documentation

Access to additional technical documentation

By registering for My Infineon collaboration platform (myICP), you gain access to additional microcontroller information, including technical add-on documentation, training, tools, and much more. Please follow these steps to get started:

Register at www.myinfineon.com with your company email address.
Send your access request to AURIX@infineon.com (with your MyInfineon login name).
You will receive a confirmation explaining how to use your new access.

MyICP

Step-by-step instructions to get registered

More Information

Details

xc2300_overview

Documents

Design Support

Videos

Microcontroller Mediacenter

Please check the youtube channel Infineon4Engineers for more videos.

Partners

Training & Engineering Services for AURIX™ and XMC™

Partner	Description / Contact
	ARCCORE is an independent software company providing AUTOSAR solutions to the global automotive market. ARCCORE ’s products include embedded software platforms and development tools and can easily be accessed from ARCCORE’s homepage. ARCCORE offers an innovative business model supporting all stages in the software development process providing both open source and commercial license terms. http://www.arccore.com/
	Bluewind's extensive knowledge of Infineon MCU products gives them the capability to provide expert services for full product design covering the complete design cycle: architectural stage, hardware/software design, product testing, CE compliance and post production. http://www.bluewind.it/ifx_home.html
E2-CAD	E2-CAD is a simplified joint stock company, founded in 2001 by people coming from the automotive electronics industry to provide high level consulting and product development support in the field of Powertrain (Electric Vehicle, transmission), Instrument clusters and Body controllers. E2-CAD has developed a Fast Prototyping ECU designed for real embedded test cases. This ECU includes three boards : The generic board includes multi-purpose interfaces for sensors/actuators (solenoids, motors, analog inputs, …) compliant to automotive standard constraints. The CPU board uses the large processing capabilities of Tricore TC 1797 with a BIOS allowing to adapt an applicative software. The third board is optional and designed to integrate specific customer additional functions. http://e2-cad.com/
Cichon Engineering Consulting	http://ing.cichon.com/infineon
	http://www.elektrobit.com/
	eSyslogic provides engineering service for Industrial, Consumer and Multi-Media customers to accelerate designs. eSyslogic has extensive knowledge in Infineon 8 and 16 bit MCU coupled with in-depth know-how in application systems providing full turnkey solution to customers. eSyslogic can provide solutions with Infineon MCUs for the following application areas: capacitive touch control board, miniature beauty and healthcare product, ultrasonic slim fit gadget, portable toll gate reader with DVR, wireless charger etc. http://www.esyslogic.com/eng/product/product01_1.asp
	http://www.etas.com/
	Fineio has earned its reputation as a Shenzhen New Hi-tech Enterprise. We specialize in offering professional R&D program to satisfy specific demands from our customers with complete service and support. Our products and business include Induction Cooker, Soybean Milk Maker, Electromagnetic Water Heater ,Air Heater, Electromagnetic Pressure Cooker, Electromagnetic coffee maker, Commercial IH Cooker and Induction heating. We are proud to have a team of professional employees experienced in research and design with a wide sales network. Our business goal is to creat the best brand with the highest reputation and influence in our field. http://www.fineio.com/en/
	The MM232R and the UB232R from FTDI are simple and easy-to-use tools to program and communicate with Infineon's XC800 microcontrollers. They provide seamless connection between the PC's USB port and the microcontroller's UART port and work efficiently together with FLOAD (part of DAVEBENCH). Applications: Flash programming UART communication http://www.ftdichip.com/Products/Modules/DevelopmentModules.htm#MM232R
	With 35 years experience in micrcontroller designs, Hitex offers development tools and development services in HW, SW and testing for Infineon microcontrollers. For safety applications according to SIL/ASIL (IEC61508, ISO26262) or ClassB (IEC60335, IEC60730), Hitex can serve you in consulting, with self test software, integration and certification. https://www.hitex.com/
	IHR is an independent company based in Rheinmünster/Germany with global offices and representatives (started in 1992 as a test laboratory and developer for driver / bus software (CAN, LIN, Flexray Ethernet)). Additionally, IHR has been active in the field of automotive application software for Tier 1's and OEM's in the field of stepper motors and flap control in the extended climatic range, actuators, ventilation of the vehicle interior and performance regulation in the seat comfort area. The projects (including ASIL requirements) are implemented according to the IHR Q management system (analogous to ISO TS 16949) and the work is carried out according to SPICE processes. Development Tools for crosslinking in automobiles LIN Drivers according to LIN1.3, 2.0, 2.1, 2.2 and SAE J2602 Flash Boot Loader (proprietary for LIN, CAN, Ethernet, according to OEM specs.) And other solutions, for example: Expert Systems for the analysis of network timings, Measuring Tools for the integration of control units, Testing Tools for the production at the OEM and Tier1. http://www.ihr.de
	https://www.kpit.com/
	Infineon and MESCO Engineering entered a cooperation to provide reference designs for IO-Link developments and full engineering service using infineon microcontroller. The MESCO IO-Link device stack is ported to a XC800 microcontroller. https://www.mesco-engineering.com/
	For over 20 years, Mixed Mode, a PIXEL Group company, has successfully supported its customers in the development of embedded and software engineering. Mixed Mode is a preferred supplier partner for Infineon projects and as such has extensive know-how of Infineon microcontroller platforms & tools (e.g. 166-, XMC-, TriCore- and Aurix- families). In addition to professional development services, Mixed Mode also offers technology and process consulting. We realize complex projects with high quality results, true to our motto „ technik.mensch.leidenschaft“ (technology.people.passion). For more information please visit our website www.mixed-mode.de
	http://powerelectronics.de/
	Murata offers technical support for Ceramic Resonators and Crystals to get the optimum oscillation circuit conditions for Infineon MCUs. https://www.murata.com/
	NDK Nihon Dempa Kogyo Co.Ltd is one of the top brand in the quartz crystal industry. Market leader especially in the field of automotive applications and telecommunication. With long experience in circuit design we offer measurement to ensure stable oscillation of crystal in the oscillator circuitry. For details about our service kindly follow the url of our German partner Frischer Electronic GmbH: http://www.frischer-frg.com/
	http://www.smart-gmbh.de/ https://www.sio-gmbh.de/
	In the field of embedded systems, softgate develops high-performance software based on your specific requirements and needs. We focus on the area of real-time systems, low-level programming, and communication buses. Here, an important element is our experience in the microprocessor environment. softgate has extensive knowledge in Infineon 8-bit, 16-bit controllers and in TriCore™ architecture. softgate has been realizing very demanding projects for various companies from the automotive, medical and consumer electronics sector already. http://www.soft-gate.de
	http://www.sotec.eu
	TELNET is a Global provider of Offshore/Nearshore Product Development and Engineering Services, following Partnership approaches to servicing our customers worldwide. TELNET has developed a specific program for the platform Aurix TC2XX, offering an Experts team of engineers trained and experimented on the microcontroller Platform Aurix TC2XX from Infineon, along with a basic knowledge on ISO26262. The aim is to provide support to all AURIX TX2XX users for any software integration purposes, such as Complex device drivers development, MCAL integration, Safetylib integration, … Being located in Paris (France) and München (Germany) through local subsidiaries, TELNET can provide a local support to all customers based in France and Germany. http://www.groupe-telnet.com
	Developing software in conformance with Safety Critical Standards can greatly increase development cost, challenges, costs, and risks. It is critical to optimize your processes to achieve compliance efficiently and cost effectively. Long or short-term Project Consulting, Mentoring. Regulatory Compliance Training and Consulting to help reduce the cost of software certification, Software Development and Testing services to mentor, coach, assist, or fully outsource any of your software engineering activities –e.g. Gap Analysis. Deep domain expertise and real-world experience with Industry Standards including: Avionics Standards: DO-178B, DO-178C, DO-254, Medical Standards: FDA 510(k), PMA, Automotive Standard: ISO 26262,Railway Standards: CENELEC, EN 50126, EN 50128, and EN 50129, Industrial Automation Standard: IEC 61508 https://www.vectorcast.com/services/global-services

Programming Services for AURIX™ and XMC™

Infineon offers programming services for certain customer-specific applications. We adapt programs for specific needs in applications such as automotive and electric motor control, building on Infineon’s Microcontroller Firmware and Software libraries.

For more Information on Programming Services please contact your nearest Infineon sales office or contact one of our partners below:

Company Name and Weblink	XC800	XC2000	Aurix™	Description
btv technologies gmbh	X	X	X	btv offers: State of the art programming , tape & reel and logistics services, on 7 days a week, 24 hours. Main customers come from the automotive and telecommunications sector. We are certified acc. to TS16949, ISO9001.
FALCON	X	X		Falcon Denshi K.K. offers the programming service from 1 chip to mass production in Japan market. Falcon Programming Center is able to offer ROM programming service, marking, taping & reeling, baking, dry packing, 2D inspection, 3D lead scan and socket cleaning & restoration service and so on.
Flatek	X	X	X	Full-fledged Automatic Programming Service Founded in 2002, Flatek provide programming and testing services in Great China Market, including service facilities in Taipei, Shenzhen, Shanghai, Chengdu, and Zhengzhou. Flatek is a ISO-9001 certified company. Major Services: Programming Service: Flatek's production facility can support various IC packages, and offer 2D inspection, and 3D lead scan services Own development of algorithms & adapters. On-Site Programming : We also focus on programming at customer's facility In addition. By applying technical support and standard flow control, Flatek equips with advanced device programmer and professional engineers to ensure precise control of cycle time and quality. IC Marking & Laser Marking. Tape reel & Dry packing follow EIA 481 standard. Functional test and Final test
Hi-Lo Systems	X	X		HI-LO SYSTEMS established its Programming Center in 2001 This Center has been ISO-9001 and TS-16949 certified. HI-LO Programming Center is able to offer comprehensive and also competitive solutions for device programming, marking, taping & reeling, baking, dry packing, laser mark, 2D inspection and 3D lead scan, etc., including special request of customized devices programming and packing. Hi-Lo offers the programming services in Great China zone, including Taipei, Hsinchu, Hong Kong and Shanghai.
HTV GmbH	X	X	X	Programming of electronic components: • Programming capacity >750,000 pcs/day • Programming of all electronic components incl. wafer-programming • Own development of algorithms & adapters • HTV-On-Site Programming - programming at customer's facility In addition we provide a full range of services like complex serial number programming, automated tape&reel service with 3D lead-inspection, laser marking, marking removal etc.
				Test and Qualification of electronic components: • Testing capacity >450,000 pcs/day • Data sheet and electrical authenticity test • Component qualification & environmental simulations • Screening of specific parameters • Fully automated high capacity testers • Development of test programs and ASICs HTV offers fast and flexible testing solutions tailor made to specific customer requirements. We test and qualify wafers, components and assemblies. Our engineers are specialized in performing complex test applications including own development of test-programs and robots.
				Long-Term Conservation of electronic components: Our unique Thermal-Absorptive Gas-Barrier Method TAB® offers a long-term conservation of components or complete devices currently up to 50 years. This product-specific reduction of the determining physical and chemical aging processes keeps components alive for decades also after end-of-life announcement. Analysis of electronic components, packaging, wafer sawing, tinning & retinning etc. Certification: ISO/TS16949 & ISO9001
ProMik	X	X	X	Full-fledged Automatic Programming Service ProMik’s trusted programming services build on 10 years experience and offer fully automated and integrated programming systems. Our services range from automated device handling/programming with lead inspection (2D-Collinearity and 3D-Coplanarity), laser-marking with full traceability to logistic services. ProMik offer an additional advantage for its customers: accessible engineering Know-How on site. Programming Proprietary automated handler, programmers and algorithms, e.g. margin verify optimize programming and margin verifying algorithm for high-speed and quality generating serial number based on individual customer specification 100% tracebility over product life cycle, down to device ID level final test of each device (function/memory) vision inspection for 2D-Collinearity and 3D-Coplanarity Lasermarking End-pumped Solid State Laser for excellent readable type-face marking will not prevent vacuum picking of device Tape& Reel vision controlled device placement and according plausibility check separate tape & reel service vision inspection for 2D-Collinearity and 3D-Coplanarity in accordance to EIA481 standards dry packaging, and if required, "pizza" boxed Logistic support Competence in this area has enabled Promik to STL (Ship to line) for key Automotive customers Certification TS16949 and ISO9001
SEMITRON	X	X	X	SEMITRON W.Röck GmbH was founded 1975 in south of Germany by Mr. Dipl.-Ing. Werner Röck More than 40 Years competence and experience! Meanwhile 140 employees, independent company with flexible structures and flat hierarchy. This company has been ISO-9001 certified and offer the programming service worldwide. Company locations are in Germany and Switzerland. For programming Security Devices, MCU`s, EPROM`s, FLASHE`s ( standard, NAND, NOR… ) OTP`s, PLD`s … we use systems from DATA I/O, BP Microsystems, ELNEC, HI/LO … etc. Automatically programming and Tape & Reel of SOT23 is no problem since 10 year`s. Marking options: Label, Ink and Laser Inspection options: 2D and 3D Leadscan Delivery: Tray, Tube and Tape & Reel Packaging: ESD, Dry Pack, Nitrogen Programming capacity: up to 500`000 pcs./day Additional services! Test and selection of electronic components BURN IN, Temp. cycling, Temp. shock High / Low temperature test for military parts Tape & Reel service ( axial, radial, SMD ) Analysis of electronic components Solder test / Degilding of Device PIN`s

For programming services companies: If you offer programming services specific for Infineon Microcontrollers and want to be listed on this page, please send a message to MC-Software@infineon.com.

Training

AURIX™ TC2xx Quick Trainings

AURIX™ TC2xx Expert Trainings

AURIX™ TC3xx Quick Trainings

AURIX™ TC3xx Expert Trainings

TRAVEO™ T2G Expert Training

KIT_T2G-B-H_EVK - Quick Training

ModusToolbox™ usage for KIT_T2G-B-H_lite - Exper Training

Expert classroom trainings for Infineon Microcontrollers

32-bit: Tricore®

Training Title	Language	Hitex	Microconsult
AURIX™ TC2xx Workshop: 32-Bit Multicore Mikrocontroller-Familie	German		X
AURIX™ TC2xx Workshop: 32-Bit Multicore Microcontroller Family	English		X
AURIX™ TC3xx Workshop: 32-Bit Multicore-Mikrocontroller-Familie (2G Zweite Generation)	German		X
AURIX™ TC3xx Workshop: 32-Bit Multicore Microcontroller Family (2G Second Generation)	English		X
TriCore® AUDO MAX Familie: Architektur und Peripherie	German		X
TriCore® AUDO MAX Family: Architecture and Peripherals	English		X
TriCore® AUDO FUTURE Familie: Architektur und Peripherie	German		X
TriCore® AUDO FUTURE Family: Architecture and Peripherals	English		X

32-bit: XMC4000/XMC1000®

Training Title	Language	Hitex	Microconsult
Keil MDK-ARM Powertraining mit XMC4500 (Cortex-M4)	German	X
Hands-on Professional Middleware für Cortex-M	German	X
XMC4000 / XCM1000 Workshop: 32-Bit Industrial Microcontroller ARM® Cortex™-M4/ ARM® Cortex™-M0	German		X
XMC4000 / XCM1000 Workshop: 32-Bit Industrial Microcontroller ARM® Cortex™-M4/ ARM® Cortex™-M0	English		X

16-bit: C166, XC166

Training Title	Language	Hitex	Microconsult
XC2000/XE16x/XC16x/ST10: Architektur, Peripherie und Embedded Programmierung	German		X
XC2000/XE16x/XC16x/ST10: Architecture, Peripherals and Embedded Programming	English		X
XC8xx/C500/8051 8-Bit Mikrocontroller: Architektur und Embedded Programmierung	German		X
XC8xx/C500/8051 8-Bit Microcontrollers: Architecture and Embedded Programming	English		X

Operating system and Applications

Operating system and Applications	Language	Hitex	Microconsult
Embedded C: Programmiermethoden und -tools für Embedded-Anwendungen	German		X
Embedded C: Programming Methods and Tools for Embedded Applications	English		X
TC17x7: Anwendungspraxis TriCore®-spezifischer Peripherie	German		X
TC17x7: Practical Application of TriCore® Specific Peripherals	English		X
Tracen und Multicore Debugging mit der PLS Universal Debug Engine UDE	German		X
Tracing and Multicore Debugging with the PLS Universal Debug Engine UDE	English		X
Tracen und Multicore Debugging für TriCore/AURIX™ (MCDS) mit Lauterbach TRACE32	German		X
Tracing and Multicore Debugging for TriCore/AURIX™ (MCDS) with Lauterbach TRACE32	English		X
Mikrocontroller/Mikroprozessor Grundlagen	German		X
Microcontroller/Microprocessor Basics	English		X
RTOS-Grundlagen und Anwendung: Mechanismen und deren Einsatz in Laufzeit-Architekturen für Embedded- und Echtzeitsysteme	German		X
RTOS Basics and Application: RTOS Mechanisms and their Application in Runtime Architectures for Embedded and Real-time Systems	English		X
RTOS-Anwendung: Entwicklung von Laufzeit-Architekturen für Embedded- und Echtzeitsysteme	German		X
RTOS Application: Development of Runtime Architectures for Embedded and Real-time Systems	English		X

Applications

Contact