SHIELD_BTS7008-1EPP

概要

This Arduino shield comes with 4 high side switches BTS7008-1EPP (10A nominal current per output). For demonstrating relay and fuse replacement, the shield can be used to control and protect outputs of a 12V supply, turn ON/OFF loads (e.g. bulbs, heating resistors, motor drives), measure the load current and detect no-load condition. The PROFET™ +2 12V family targets high current automotive applications (e.g. ECU power feeds, auxiliary power outlets, heaters).

特長

  • Lowest RDS(ON) on small footprint 2mΩ – 8mΩ in TSDSO-14
  • Protection concept with current trip and intelligent latch
  • Diagnosis with high current sense accuracy up to current trip level
  • Optimized for design flexibility across the family by pin to pin and external components compatibility
  • Miniaturization / Shrink of the PCB Area

利点

  • 50% reduced internal operating current consumption
  • Simplified & cost efficient ground network
  • Current sense accuracy (kILIS) ≤ 5% @ nominal load current
  • Benchmark cranking voltage capability able to work down to 3.1 V
  • Smaller package size for area savings
  • Very low output leakage current (≤ 0.5 μA up to 85°C)

推奨アプリケーション例

  • Suitable for driving up to 20A resistive, inductive, capacitive loads
  • Replaces electromechanical relays, fuses and discrete circuits
  • Suitable for driving heating loads and general power distribution
サポート