1ED3890MC12M
EiceDRIVER™ Enhanced 9 A, 5.7 kV single-channel highly flexible isolated gate driver with ±9 A typical sinking and sourcing peak output current in small space-saving DSO-16 fine pitch wide-body package with large creepage distance (>8 mm) for IGBTs, MOSFETs and SiC MOSFETs.
1ED3890MC12M belongs to the EiceDRIVER™ Enhanced 1ED38xx family (X3 digital family) – single-channel isolated gate driver with adjustable control and protection functions including DESAT, Soft-Off, UVLO, Miller clamp, two level turn off (TLTO), and Fault, to simplify the design of highly reliable systems. All parameter adjustments are done from the input side via the I2C interface (pin SDA and SCL). 1ED3890 is suitable for IGBTs, SiC and Si MOSFETs.
The digitally configurable approach enable customers for predictive maintenance in sophisticated industrial systems. For example, 1ED38xx is able to register the counts of UVLO spikes, monitor the supply voltage and temperature increase. With the long-term analysis of the collected data, customers are able to decide when is the best time to schedule a maintenance cycle before the system fails. The I2C interface also enables rapid prototyping without hardware changes.
1ED3491 (X3 Analog) version available, with active Miller clamp (clamp driver for external MOSFET), adjustable DESAT and Soft-off.
特長
- Highly flexible EiceDRIVER™ Enhanced single channel isolated gate driver 1ED38xx family (X3 Digital family)
- For use with 650 V/1200 V/1700 V/2300 V IGBTs, Si and SiC MOSFETs
- 2300 V functional offset voltage capable for selected applications
- ±9 A typical sinking and sourcing peak output current
- 40 V absolute maximum output supply voltage
- Separate source and sink outputs with two-level turn-off
- Active Miller clamp
- Precise and temperature compensated VCEsat detection (DESAT) with fault output
- IGBT soft turn-off after desaturation detection
- FLT and RDY status signaling to µController
- Parameter adjustment from input side via I2C bus:
- Undervoltage lockout (UVLO)
- Active Miller clamp
- DESAT protection
- Soft turn off
- Two level turn offUndervoltage lockout (UVLO)
- Over temperature shutdown
利点
- Over-temperature shut down at 160 °C (±10 °C)
- Tight IC-to-IC propagation delay matching (30 ns max.)
- High common-mode transient immunity CMTI >200 kV/μs
- Suitable for operation at high ambient temperature up to 125 °C
- Small space-saving DSO-16 fine pitch wide-body package with large creepage distance (>8 mm)
- UL 1577 VISO = 6.84 kV (rms) for 1 s, 5.7 kV (rms) for 1 min
- Enable fast design cycles and the best-in-class DESAT accuracy thanks to low external component count and the adjustable DESAT with Soft-off
- IEC 60747-17/VDE 0884-11 with VIORM = 1767 V (peak, reinforced)
- The precise threshold and timings, combined with UL 1577 and IEC 60747-17/VDE 0884-11 certifications enable superior application safety
- Perfect fit for all applications requiring a reliable DESAT protection, benefiting from an active Miller clamp and preferring small PCB space requirements
Part No | Typ. Current | Feature | Isolation Certification |
±3 A |
I2C configurability, Miller clamp, DESAT2, soft-off, two-level turn off, integrated ADC
|
UL 1577 & VDE-11 | |
±3 A | UL 1577 | ||
±6 A |
UL 1577 & VDE-11 | ||
±6 A |
UL 1577 | ||
±9 A |
UL 1577 & VDE-11 | ||
±9 A | UL 1577 |
- EiceDRIVER™ Enhanced now include 1ED38XX (X3 Digital), with I2C configurability for DESAT, Soft-Off, UVLO, Miller clamp, TLTO and Fault
- Up to 9 A output current, 200 kV/µs CMTI, 30 ns Max. propagation delay matching, 40 V Max output supply voltage.
- Perfect for CoolSiC™ SiC MOSFET. VDE 0884-11 & UL 1577 (planned). For solar, EV charging, industrial drive, UPS, etc.
- The EiceDRIVER™ Enhanced X3 Analog family (1ED34xx), with DESAT (adjustable filter time), Miller Clamp, soft-off (adjustable current)
- Up to 9 A output current, 200 kV/µs CMTI, 30 ns Max. propagation delay matching, 40 V Max output supply voltage.
- Perfect for CoolSiC™ SiC MOSFET and IGBT7. VDE 0884-11 & UL 1577. For solar, EV charging, industrial drive, UPS, etc
シリコンカーバイド(SiC)MOSFETは、パワーエレクトロニクスにあらゆる可能性を提供します。しかし、適切なゲートドライバを備えたSiC MOSFETを使用し、システムの利点を十分に活かすには、どうすれば良いでしょうか。本トレーニングでは、次のことが学べます:お客様のSiC MOSFET用に基準ゲート抵抗値を算出する方法。ピーク電流と消費電力の要件をもとに最適なゲートドライバICを選択する方法。最悪の条件下を想定し、実験室の環境でゲート抵抗値を微調整する方法。
- EiceDRIVER™ Enhanced now include 1ED34XX (X3 Analog), with DESAT(adjustable filter time), soft-off(adjustable current)
- Up to 9 A output current, 200 kV/µs CMTI, 30 ns Max. propagation delay matching, 40 V Max output supply voltage.
- Perfect for CoolSiC™ SiC MOSFET. VDE 0884-11 & UL 1577 (planned). For solar, EV charging, industrial drive, UPS, etc.